Roof Batten 0.48 Dimensions
The steel beam dimensions for the Roof Batten 0.48 section can be seen in the table. The depth of the section is 40 mm. The width of the section is 40 mm.
| Dimension | Value |
|---|---|
| Depth | 40 mm |
| Left Flange Width | 20 mm |
| Right Flange Width | 20 mm |
| Top Width | 34 mm |
| Thickness | 0.48 mm |
| Fillet Radius | 0.48 mm |
| Lip Depth | 6 mm |
| Hat Angle | 15.62 mm |
| Lip Angle | 90 mm |
Roof Batten 0.48 Section Properties
The Roof Batten 0.48 section has an area of 77.2mm2. The below table outlines the Roof Batten 0.48 section properties including the torsion constant as well as moment of inertia and plastic modulus properties.
| A | Izp | Iyp | rz | ry | J | Iw |
|---|---|---|---|---|---|---|
| 77.2 mm2 | 19600 mm4 | 51200 mm4 | 15.9 mm | 25.7 mm | 5.93 mm4 | 4700000 mm6 |
Materials and Design Standards Roof Batten 0.48
This section is typically designed using the design standard AS 4600-2005 and is manufactured using a cold formed process as it is a steel section.
