175x75x20x2.3 Dimensions
The steel beam dimensions for the 175x75x20x2.3 section can be seen in the table. The depth of the section is 175 mm. The width of the section is 75 mm.
| Dimension | Value |
|---|---|
| Depth | 175 mm |
| Top Width | 75 mm |
| Top Thickness | 2.3 mm |
| Bottom Width | 75 mm |
| Bottom Thickness | 2.3 mm |
| Web Thickness | 2.3 mm |
| Fillet Radius | 3.5 mm |
| Lip Depth | 20 mm |
175x75x20x2.3 Section Properties
The 175x75x20x2.3 section has an area of 800mm2. The below table outlines the 175x75x20x2.3 section properties including the torsion constant as well as moment of inertia and plastic modulus properties.
| A | J | Cz | Cy | Izp | Iyp | rzp | ryp | Plastic Mod Xp | Plastic Mod Yp | Alpha |
|---|---|---|---|---|---|---|---|---|---|---|
| 800 mm2 | 1440 mm4 | 23.4 mm | 87.5 mm | 3860000 mm4 | 603000 mm4 | 69.5 mm | 27.5 mm | 51100 mm3 | 17800 mm3 | 0 deg |
Materials and Design Standards 175x75x20x2.3
This section is typically designed using the design standard EN1993-1-3:2006 and is manufactured using a cold formed process as it is a steel section.
