200x75x20x3.2 Dimensions
The steel beam dimensions for the 200x75x20x3.2 section can be seen in the table. The depth of the section is 200 mm. The width of the section is 75 mm.
| Dimension | Value |
|---|---|
| Depth | 200 mm |
| Top Width | 75 mm |
| Top Thickness | 3.2 mm |
| Bottom Width | 75 mm |
| Bottom Thickness | 3.2 mm |
| Web Thickness | 3.2 mm |
| Fillet Radius | 4.8 mm |
| Lip Depth | 20 mm |
200x75x20x3.2 Section Properties
The 200x75x20x3.2 section has an area of 1170mm2. The below table outlines the 200x75x20x3.2 section properties including the torsion constant as well as moment of inertia and plastic modulus properties.
| A | J | Cz | Cy | Izp | Iyp | rzp | ryp | Plastic Mod Xp | Plastic Mod Yp | Alpha |
|---|---|---|---|---|---|---|---|---|---|---|
| 1170 mm2 | 4120 mm4 | 21.8 mm | 100 mm | 7080000 mm4 | 826000 mm4 | 77.7 mm | 26.5 mm | 83200 mm3 | 24300 mm3 | 0 deg |
Materials and Design Standards 200x75x20x3.2
This section is typically designed using the design standard EN1993-1-3:2006 and is manufactured using a cold formed process as it is a steel section.
