225x75x25x4.5 Dimensions
The steel beam dimensions for the 225x75x25x4.5 section can be seen in the table. The depth of the section is 225 mm. The width of the section is 75 mm.
| Dimension | Value |
|---|---|
| Depth | 225 mm |
| Top Width | 75 mm |
| Top Thickness | 4.5 mm |
| Bottom Width | 75 mm |
| Bottom Thickness | 4.5 mm |
| Web Thickness | 4.5 mm |
| Fillet Radius | 6.8 mm |
| Lip Depth | 25 mm |
225x75x25x4.5 Section Properties
The 225x75x25x4.5 section has an area of 1760mm2. The below table outlines the 225x75x25x4.5 section properties including the torsion constant as well as moment of inertia and plastic modulus properties.
| A | J | Cz | Cy | Izp | Iyp | rzp | ryp | Plastic Mod Xp | Plastic Mod Yp | Alpha |
|---|---|---|---|---|---|---|---|---|---|---|
| 1760 mm2 | 12400 mm4 | 21.7 mm | 112.5 mm | 12880000 mm4 | 1220000 mm4 | 85.5 mm | 26.4 mm | 137000 mm3 | 36400 mm3 | 0 deg |
Materials and Design Standards 225x75x25x4.5
This section is typically designed using the design standard EN1993-1-3:2006 and is manufactured using a cold formed process as it is a steel section.
