100x50x2.3 Dimensions
The steel beam dimensions for the 100x50x2.3 section can be seen in the table. The depth of the section is 100 mm. The width of the section is 50 mm.
| Dimension | Value |
|---|---|
| Depth | 100 mm |
| Top Width | 50 mm |
| Top Thickness | 2.3 mm |
| Bottom Width | 50 mm |
| Bottom Thickness | 2.3 mm |
| Web Thickness | 2.3 mm |
| Fillet Radius | 2.3 mm |
100x50x2.3 Section Properties
The 100x50x2.3 section has an area of 443mm2. The below table outlines the 100x50x2.3 section properties including the torsion constant as well as moment of inertia and plastic modulus properties.
| A | J | Cz | Cy | Izp | Iyp | rzp | ryp | Plastic Mod Xp | Plastic Mod Yp | Alpha |
|---|---|---|---|---|---|---|---|---|---|---|
| 443 mm2 | 815 mm4 | 13.6 mm | 50 mm | 699000 mm4 | 110000 mm4 | 39.7 mm | 15.8 mm | 16100 mm3 | 5520 mm3 | 0 deg |
Materials and Design Standards 100x50x2.3
This section is typically designed using the design standard EN1993-1-3:2006 and is manufactured using a cold formed process as it is a steel section.
