200x75x25x4.5 Dimensions
The steel beam dimensions for the 200x75x25x4.5 section can be seen in the table. The depth of the section is 200 mm. The width of the section is 75 mm.
| Dimension | Value |
|---|---|
| Depth | 200 mm |
| Top Width | 75 mm |
| Top Thickness | 4.5 mm |
| Bottom Width | 75 mm |
| Bottom Thickness | 4.5 mm |
| Web Thickness | 4.5 mm |
| Fillet Radius | 6.8 mm |
| Lip Depth | 25 mm |
200x75x25x4.5 Section Properties
The 200x75x25x4.5 section has an area of 1650mm2. The below table outlines the 200x75x25x4.5 section properties including the torsion constant as well as moment of inertia and plastic modulus properties.
| A | J | Cz | Cy | Izp | Iyp | rzp | ryp | Plastic Mod Xp | Plastic Mod Yp | Alpha |
|---|---|---|---|---|---|---|---|---|---|---|
| 1650 mm2 | 11600 mm4 | 23.1 mm | 100 mm | 9720000 mm4 | 1180000 mm4 | 76.8 mm | 26.7 mm | 116000 mm3 | 35400 mm3 | 0 deg |
Materials and Design Standards 200x75x25x4.5
This section is typically designed using the design standard EN1993-1-3:2006 and is manufactured using a cold formed process as it is a steel section.
