225x75x20x2.3 Dimensions
The steel beam dimensions for the 225x75x20x2.3 section can be seen in the table. The depth of the section is 225 mm. The width of the section is 75 mm.
| Dimension | Value |
|---|---|
| Depth | 225 mm |
| Top Width | 75 mm |
| Top Thickness | 2.3 mm |
| Bottom Width | 75 mm |
| Bottom Thickness | 2.3 mm |
| Web Thickness | 2.3 mm |
| Fillet Radius | 3.5 mm |
| Lip Depth | 20 mm |
225x75x20x2.3 Section Properties
The 225x75x20x2.3 section has an area of 915mm2. The below table outlines the 225x75x20x2.3 section properties including the torsion constant as well as moment of inertia and plastic modulus properties.
| A | J | Cz | Cy | Izp | Iyp | rzp | ryp | Plastic Mod Xp | Plastic Mod Yp | Alpha |
|---|---|---|---|---|---|---|---|---|---|---|
| 915 mm2 | 1650 mm4 | 20.6 mm | 112.5 mm | 6940000 mm4 | 653000 mm4 | 87.1 mm | 26.7 mm | 72600 mm3 | 18300 mm3 | 0 deg |
Materials and Design Standards 225x75x20x2.3
This section is typically designed using the design standard EN1993-1-3:2006 and is manufactured using a cold formed process as it is a steel section.
